- CV Line Equipment
- Energy
- MV, HV & EHV
- Insulation
Flexible, well controlled
The flexible Nitrogen Circulation System NCS allows you to optimize the process for a wide range of cables. During a ramp down, the tube/cable cooling by gas is fast and well controlled, generating less stop scrap.
- Nitrogen flow capacity
- 300 mᶟ/h at 10 bar (q)
- Cooling capacity
- 52 kW
- Weight approx.
- 1700 kg
- Dimensions L x W x H
- 4220 x 1200 x 2368 mm
Upgrading?
Description
The various cooling circulations are a shutdown cooling loop, and short and long gas cooling loops. In addition, a pre-cooling and separator gas circulation can be added to the system.
The nitrogen circulation unit is equipped with 3 by-product traps with the timer control valve, so that by-product can be collected efficiently from the circulating gas.
The unit consists of a gas circulation blower, a heat exchanger, three by-product outlets, a ventilation blower and all necessary valves and instruments. All these components have been installed on the same frame, which forms one complete unit.
It is ready-fitted and completely tested.
Options
- Shut down cooling piping
- Gas cooling piping
- Precooling circulation piping
- NCS interface box for S7 logic
Need more details on the Nitrogen Circulation System NCS, CCV? Contact your nearest Maillefer representative →