- Crossheads
- Energy
- MV, HV & EHV
- Insulation
Perfect distribution, short residence time
Our Triple Crosshead THC 50/90 ensures minimum material consumption and down time.
Key figures
- Conductor diameter
- 6.0–50 mm
- Conductor screen thickness
- 0.3–2.0 mm
- Insulation thickness
- 1.0–20 mm
- Weight
- 500 kg
Description
Our Triple Crosshead THC 50/90 is used for three-layer extrusion of MV, HV, XLPE, and EPR cables. An additional flow distributor for EPR insulation is applied. The dimensioning of the flow channels ensures exact thickness for each layer./ Conical distributors make the handling of the head easier. When the distributor is removed, a small movement of the distributor is enough to loosen it from the body./ An independently controlled fluid circulation unit is used for the crosshead's temperature control.
Technical characteristics
- Conductor diameter
- 6.0–50 mm
- Conductor screen thickness
- 0.3–2.0 mm
- Insulation thickness
- 1.0–20 mm
- Weight
- 500 kg
- No. of temperature controlled zones
- 3
- Cable diameter
- 10–90 mm
- Insulation screen thickness
- 0.3–2.0 mm
- Heating of crosshead body
- with oil or water and resistors
Options
- Sector tools
- Conductor guiding rollers
- Milliken compacting unit
- Distributor for rubber insulation
Need more details on the THC 50/90? Contact your nearest Maillefer representative →