- Crossheads
- Communication
- Telecom Cable
- Insulation
Perfect distribution, short residence time.
Our crossheads have compact design and are very easy to handle and quick to assemble.
- Cable diameter, max.
- 6 mm
- Entry diameter, max.
- 4 mm
- Weight
- 36 kg
- No. of temperature controlled zones
- 2
Description
Our Dual Crosshead ECH 7/18 F main applications include insulation of telecommunication and data cable conductors as well as special wires with fluoropolymers. All parts of this head are made of corrosion resistant materials like inconel or stainless steel.
A fixed or manual die centring system can be easily selected by just changing one part in the head. Excellent concentricity, that meets most specifications, can be achieved in fixed centring mode. Manual centring mode is only required for some specific applications with extreme tight concentricity tolerances.
The head configuration allows dual layer extrusion of products such as foam/skin, insulation/skin or insulation/striping. Single layer products with solid or foam insulation can be produced using a dummy outer layer distributor. The main distributor of this head is conical shaped and is equipped with an internal heater. A disk type radial distributor is utilised for the outer layer.
The high performance and user friendliness of the head are achieved by combining smart design, close tolerances on all parts and unique geometry for each distributor.
Need more details on the Dual Crosshead ECH 7/18 F? Contact your nearest Maillefer representative →